Vending machine failure and maintenance method

The vending machine uses a spring spiral cargo channel. When the machine is shipped, the spring rotation will produce a squeezing force on the product. The squeezing force has positive and oblique squeezing force. Under the action of the positive squeezing force crooked, or even fell. This will cause the product to be stuck under the cargo channel (below the spring); under the action of the oblique extrusion force, the friction between the product and the goods to the two side guards will increase, and when the friction force is large, the product will not work properly. shipped. Solution: first take out the stuck goods, and then enter the 'fault' item on the vending machine management page to select clear the stuck goods fault. In future operations, make corresponding changes to the placement of commodities. The size of the main commodities should be as consistent as possible with the size of the cargo lane, not too small or larger than the size of the cargo lane spring. 2. There are four main reasons for this situation: 1. There is no change in the change finder; 2. There is change in the change finder, but the default change in the system is zero; 3. 4. The paper money machine is too dusty Solutions: 1. Make up the change 2. Enter the system management page to check if there is no record after the change was made up last time (some vending machines need to manually input the change after making up the change Fill in the amount of change), if the quantity is 0, please modify 3. Disassemble the banknote holder and take out the stuck currency. 4. Disassemble the banknote holder and use a brush to carefully and carefully clean the dust or send it back to the manufacturer for cleaning. 3. The change is put into the vending machine, and the change does not enter the change machine, but is deposited in the cash collection area. This problem is mostly due to the system error of the banknote device (not shutting down for a long time) Solution: enter the system management page after turning it off for three minutes, and then use a small stick to dig into the reset button of the banknote device to reset (insert a small stick and hold it down) After pressing the reset button, you will see that the light on the banknote receptacle will turn on and off, and then turn on and let go.) After a few minutes, turn off the machine, and then turn it on again to basically solve the problem. 4. The light of the banknote outlet of the vending machine does not light up or flickers on and off, and at the same time, the banknote machine does not suck money into it. There are two possibilities for such problems: 1. There are foreign objects in the banknote holder. 2. The iron money box under the banknote holder is not installed. Scan code payment is not successful solution: the signal is unstable, find the signal line and pull the signal outside the cargo machine.

Haloo Automation Equipment Co., Ltd has a professional team of engineers and technology professionals.

Deliver value to our customers by providing the most reliable and efficient products as vending machine.

Through our distribution and marketing competencies, Haloo Automation Equipment Co., Ltd provides creative, customized, solutions for our customers. As a result, we achieve superior profit growth as the vending machine company of choice.