Failure and maintenance methods of unmanned vending machines

When the unmanned vending machine puts change, the change does not enter the change machine but is deposited in the cash collection area. This problem is mostly due to the error of the banknote machine system. Solution: After shutting down and turning it on for three minutes, enter the system management page, and then use a small stick to penetrate the reset button of the banknote device to reset it, wait a few minutes, shut down, and restart the machine again to basically solve the problem. 2. The unmanned vending machine uses a spring spiral cargo channel. When the machine is shipped, the spring rotation will produce a squeezing force on the product. The squeezing force has positive and oblique squeezing force. In the positive squeezing force Under the action of the product, it is easy to fall over or even fall. This will cause the product to be stuck under the cargo aisle. Under the action of the oblique extrusion force, the friction between the product and the guards on both sides of the cargo channel will increase. When the frictional force is large, the product cannot be shipped normally. Solution: first take out the stuck goods, and then enter the 'fault' item on the unmanned vending machine management page and select to clear the stuck goods fault. And in the future business, make corresponding changes to the placement of the goods, mainly that the size of the goods should be as consistent as possible with the size of the cargo channel, not too small or larger than the size of the cargo channel spring. 3. The light of the banknote receptacle of the unmanned vending machine does not light up or flickers on and off. At the same time, the banknote machine does not suck money into it. There are two possibilities for such problems: 1. There are foreign objects in the banknote receptacle. As a result, 2. The iron cash box under the banknote device was not installed properly. Solution: Turn on the banknote machine, remove the foreign objects, turn off the machine, turn it on again, turn off the power of the machine, and re-install the iron cash drawer. Fourth, the unmanned vending machine is out of stock, and no change is given. The main reasons for this situation are as follows: 1. There is no change in the changer. 2. There is change in the changer, but the default change in the system is zero. 3. The changer is stuck. 4. The dust of the paper money machine is too serious. Solution: 1. Make up the change. 2. Enter the system management page and check whether there is no record after the change was made up last time. If the quantity is 0, please modify it. 3. Disassemble the banknote holder and take out the stuck currency. 4. Disassemble the banknote holder and use a brush to carefully and carefully remove the dust or send it back to the manufacturer for cleaning. 5. The solution for successful scan code payment and no shipment: This is caused by unstable signal. Find the signal line and pull the signal outside the cargo machine to detect the signal. Haloo Automation Equipment Co., Ltd is mainly engaged in unmanned vending machines, automatic vending machines, and professional vending machine manufacturers have a complete after-sales service system. Let customers buy personalized products at standard money prices.

Haloo Automation Equipment Co., Ltd also discusses implications for both research and the practice of operations in building systems to help people succeed in both the short and long run.

Our mission is to operate the best specialty retail business in domestic, regardless of the product we sell. Because the product we sell is vending machine, our aspirations must be consistent with the promise and the ideals of the volumes which line our manufacture.

Establish a unique brand as Haloo that cuts through the clutter, and you'll get you the capital you need to get moving.