What are the faults and maintenance methods of vending machines?

What are the faults and maintenance methods of vending machines? Below the author explains to us the knowledge points of vending machine, let’s learn it together with the author, hope it will be helpful to you! 1. The vending machine jams; due to the spring spiral delivery, the spring rotates when the machine is shipped It will produce squeezing force on the product. The squeezing force has positive and oblique squeezing force. Under the action of the positive squeezing force, the product is easy to sway or even fall. This will cause the product to be stuck under the goods arrival (under the spring); under the action of the oblique squeeze force, the friction between the goods and the two side guards of the goods will increase. When the friction is large, the goods will not be Ship normally. Solution: First take out the stuck goods, and then enter the 'Fault' item on the vending machine management page and choose to clear the stuck goods fault. And in the future business, the product placement will be changed accordingly. The main thing is that the size of the main product should be as consistent with the size of the goods as possible, not too small and not larger than the size of the spring. Second, automatic The vending machine puts change in, but the change does not enter the change device but is deposited in the money collection area; this problem is mostly due to a system error in the banknote device (long time failure to shut down and rest). Solution: After shutting down and turning on for three minutes, enter the system management page and then use a small stick to penetrate the reset button of the banknote device to reset (after inserting the small stick and press the reset button, you will see the light on the banknote device opening and then turning off again Let go when it’s on) Wait a few minutes and then turn it off and restart it again to basically solve the problem! Third, the vending machine is out of stock, and there is no change; the main reasons for this situation are as follows: 1. There is no change in the changer There is change; 2. There is change in the change device, but the default amount of change in the system is zero; 3. The change device is stuck; 4. The paper currency device is too dusty. Solution: 1. Make up the change; 2. Go to the system management page and check if there is no record after the change was made last time (some vending machines need to manually enter the number of make-up changes after making up the change). If the amount is 0, please Modification; 3. Disassemble the banknote device to take out the jammed currency; 4. Disassemble the banknote device with a brush to carefully and carefully clean up the dust or send it back to the manufacturer for cleaning. 4. The light on the banknote receptacle of the vending machine is not on or flickering, and at the same time the banknote is put into the machine to not suck money; there are two possibilities for this type of problem: 1. There are foreign objects in the banknote receptacle. No, 2. The iron cash box under the banknote device is not installed properly. Solution: Turn on the banknote device, remove the foreign objects, turn it off, and then turn it on again. Turn off the power of the machine and reinstall the iron cash box! V. The payment is successful without shipping. Solution: This is the signal is unstable As a result, find out the signal line to pull the detection signal outside the cargo plane. What the author shared with us today is information about the vending machine industry, so if you want to know more about our vending machine industry, welcome everyone to click into our official website and wait for your information online! Previous post: What are the commercial advantages of unmanned vending machines?