What are the common faults and treatment methods of various vending cabinets?

What are the common faults and treatment methods of various vending cabinets? The author of Dongguan vending machine manufacturer will introduce to you the common faults and treatment methods of various vending machines. I hope it will be helpful to you. 1. Vending machine jam: due to the use of spring spiral goods, the spring rotation will produce squeezing force on the goods when the machine is shipped. The squeezing force has positive and oblique squeezing force. Under the action, the product is easy to fall over or even fall down. This will cause the product to be stuck under the goods arrival (under the spring); under the action of the oblique squeeze force, the friction between the goods and the two side guards of the goods will increase. When the friction is large, the goods will not be able to Ship normally. Solution: First take out the stuck goods, and then enter the 'Fault' item on the vending machine management page and choose to clear the stuck goods fault. And in the future business, the product placement will be changed accordingly. The main product size should be as consistent with the delivery size as possible, not too small and not larger than the delivery spring size! Second, automatic The vending machine is out of stock and there is no change. This situation is mainly caused by the following reasons: 1. There is no change in the change device; 2. There is change in the change device, but the default amount of change in the system is zero; 3. The change device is stuck; 4. Paper money device The dust is too serious. The Dongguan vending machine manufacturer tells you the solution: 1. Make up the change; 2. Go to the system management page to check if there is no record after the last change was made (some automatic vending machines need to manually enter the amount of change after making the change) , If the quantity is 0, please modify; 3. Open the banknote device to take out the jammed currency; 4. Open the banknote device with a brush to carefully and carefully clean up the dust or send it back to the manufacturer for cleaning. 3. The vending machine puts change into it, and the change does not enter the change device but is instead deposited in the money collection area. This problem is mostly caused by an error in the banknote device system (the failure to shut down for a long time). Solution: Three minutes after shutting down, enter the system management page and then use a small stick to penetrate the reset button of the banknote device to reset (after inserting the small stick and press the reset button, you will see the light on the banknote device opening and then turning off again Let go if it’s on) Wait a few minutes and then turn it off and restart it again to basically solve the problem! Fourth, the light on the vending machine's banknote receptacle does not turn on or turns on and off, and the banknotes are not sucked into the machine at the same time money. There are mostly two possibilities for this kind of problem: 1. It is caused by foreign objects in the banknote device, and 2. The iron cash box under the banknote device is not installed properly. Solution: Turn on the banknote device, remove the foreign objects, turn it off, and then turn it on again. Turn off the power of the machine and reinstall the iron cash box! The above content is organized and released by the author of the Dongguan vending machine manufacturer. If you For more information about vending machines, please click to enter our company's official website: What are the technologies for new retail smart containers?