How to deal with the failure of the touch screen vending machine?

The idea of ​​using touchscreens for vending machines was first revealed at the 2009 Consumer Electronics Show. As you may recall, Samsung and Coca-Cola's 46-inch LCD display mounted on the front panel of the vending machine impresses with its high level of interactivity. This kind of touch screen vending machine is becoming mainstream, perhaps, the popularity of vending machines and touch screen this new type of vending machine is only a matter of time. So, what should we do if there is a failure when using the touch-type vending machine? First, observe whether the indicator light on the control box is working normally. When it is normal, the indicator light is green and flashing. But if the above parts are normal, you can use the replacement method to check the touch screen, first replace the control box, then replace the touch screen, and finally replace the host. Then, check whether each wiring interface is loose, and then check whether there is a conflict between the serial port and the interrupt number. If there is a conflict, adjust the resources to avoid the conflict. Last, check whether there are cracks on the surface of the touch screen, and replace it in time if there are cracks. It is also necessary to check whether there is dirt on the surface of the touch screen, and if so, use a soft cloth to remove it. How to strengthen the safety management of vending machines? Fix several feet of the machine on the ground with cement, or fix the back of the machine on the wall, which can effectively prevent people from shaking the machine and stealing goods; there are usually camera openings on the machine door, so install the camera on the machine It is a good choice to increase the deterrence and safety factor; installing cameras near the site, you can also negotiate with the site provider or nearby shops, rent their cameras or adjust the angle of their existing cameras to take care of the machine; if If the site provider has security personnel, it is also possible to increase the inspection intensity near the machine through negotiation; frequently collect banknotes and coins to reduce possible losses.

Haloo Automation Equipment Co., Ltd has an array of branches in domestic for munufacturing vending machine.

If vending machine isn't meeting your needs, or you just want to see what else is out there, check out these content monitoring alternatives Haloo Automation Equipment.

Simultaneously being able to offer not only the product but also the service, gives the customer a quality 'one-stop-shop' service.

Haloo Automation Equipment Co., Ltd always focus on the situation of global market and understands the importance factors of manufacturing vending machine.