Professional Haloo Vending Machine Manufacturer & Supplier.
Common faults and solutions of vending machines
The vending machine uses a spring spiral cargo channel. When the machine is shipped, the spring rotation will produce a squeezing force on the product. The squeezing force has positive and oblique squeezing force. Under the action of the positive squeezing force crooked, or even fell. In this way, the goods will be stuck under the goods (under the spring), and the friction between the goods and the guards on both sides of the goods will be increased under the action of the oblique squeezing force. When the friction is large, the goods will not be able to Ships normally. Solution: first take out the stuck goods, and then enter the 'fault' item on the vending machine management page to select clear the stuck goods fault. And in the future business, make corresponding changes to the placement of commodities, and the size of the main commodities should be as consistent as possible with the dimensions of the cargo lane. 2. There are the following reasons for the vending machine to ship without change 4. The dust on the banknote device is too serious. Solution: 1. Make up the change 2. Enter the system management page to check if there is no record after the change was made up last time, some vending machines need to manually input the amount of change after making up the change, if the quantity is 0, please modify 3 . Disassemble the banknote holder and take out the stuck currency. 4. Disassemble the banknote holder and use a brush to carefully and carefully remove the dust or send it back to the manufacturer for cleaning. 3. The vending machine puts change, but the change does not enter the change machine, but is deposited in the cash collection area. This problem is mostly due to the error of the banknote machine system, and it has not been shut down for a long time. Solution: After shutting down the machine and turning it on for three minutes, enter the system management page, and then use a small stick to go into the reset button of the banknote device to reset. After inserting the small stick and pressing the reset button, you will see the light of the banknote device port on and off, and then again. When it is on, let it go, wait for a few minutes, turn it off, and restart it again to basically solve the problem. 4. The light of the banknote receptacle of the vending machine does not light up or flickers on and off. At the same time, when the banknote machine is put into the banknote machine and does not absorb money, there are two possibilities: 1. It is caused by foreign objects in the banknote receptacle. 2. The iron cash box under the banknote device is not installed properly. Solution: turn on the banknote machine, remove the foreign objects, turn off the machine, turn it on again, turn off the power of the machine, and re-install the iron cash drawer!
If you are looking for an effective and safe way to take care of commercial vending machine, then vending machine vending machine manufacturers are the best bet.
Haloo Automation Equipment Co., Ltd also maintains a friendly, fair, and creative work environment, which respects diversity, new ideas, and hard work.
commercial vending machine problems are nothing new, almost every one of us have to go through them at some point of our lives and some of us never get rid of them. with the development of vending machine manufacturers technology, now provides a perfect cure for that.
Haloo Automation Equipment Co., Ltd can assure you that we never compromise on our quality standards and are one of the best in the market at present.