Why should vending machines be waterproof and rainproof

Factories, hospitals, stations, tourist attractions and other places with a large flow of people or a large number of people and relatively closed spaces are ideal unmanned vending machines. Some places are indoors, and some places are outdoors. Put vending machines outdoors in the open air. In the entire vending machine industry, vending machines are not waterproof or rainproof, especially for models with large touch screens. It is common knowledge in the industry that the screen will fail when exposed to water, just like mobile phones. The screen cannot be operated if it gets wet. Soaking in water or rain may cause the circuit board to corrode. There are heat dissipation vents under the vending machine, which are the same as the inside. If you soak in water, water will definitely enter the inside of the machine. The coin slot of the coin machine on the machine is also connected to the inside. Water will enter in heavy rain, and the touch screen will also cause water to enter and malfunction. When choosing the location of the vending machine, the ground is required to be firm and flat and partly higher to prevent accidents in which the machine tilts due to ground collapse when it rains or accidents in which the machine is flooded by water in low-lying areas. Also build a canopy to protect the machine from rain. Even if some vending models do not have a touch screen or a coin slot, do not get directly exposed to the rain, which will increase the failure rate and affect the service life of the vending machine. In particular, the beverage vending machines in the snake-shaped cargo aisle have a relatively solid workmanship, and it is normal to take measures to cover the wind and rain for eight years or even more than ten years.