Professional Haloo Vending Machine Manufacturer & Supplier.
Why is the vending machine in the spring aisle stuck and how to deal with it?
In the process of operating the vending machine in the spring aisle, it is a headache to get stuck. Why is the spring aisle stuck? 1. The size of the product does not match the specification of the aisle; 2. The posture is incorrect; 3. The packaging does not meet the requirements; 4. The communication is interrupted; 5. The machine is malfunctioning. What should I do if the spring machine is stuck? What should I do if the goods are stuck? From the perspective of customers, if you are a customer who buys products in a vending machine, you have the following options: 1. Shake the body vigorously to see if it can fall off (effective in a few cases, mainly for small vending machines with relatively light weight) ; 2. Buy another product from the same aisle and push it out; 3. Contact the phone number of the operator on the fuselage. From the perspective of an operator, as an operator, you must provide customers with a better shopping experience. You have the following options: 1. Give the customer a refund, and remotely lock the aisle. 2. Reflect on whether the product is suitable for sale on vending machines, whether the size and packaging form meet the requirements; 3. Check the network signal to see if all 4G traffic is stuck in this position Whether the signal is good or not, do not use a communication provider with a bad signal (China Mobile, China Unicom, China Telecom, whichever has a good 4G signal can use the card, or contact the machine manufacturer to use the special card recommended by the manufacturer); 4. Check whether the machine has Fault, if there is a fault, eliminate it, if you can't solve it by yourself, contact the manufacturer's after-sales service. What should vending machine manufacturers do if there is a hardware failure in the spring channel of the vending machine? How to replace the spring? How to replace a Motor Module? 1. Remove the feeder box (open the door, pull out the wire, and take out the feeder box); 2. Unplug the motor module to connect the wire harness of the feeder box; 3. Pull out the motor module and spring; 4. According to the left and right rotation, Rotate to separate the spring from the motor block. The current vending machines are all modular in design, and it is relatively simple to replace accessories. Many modules can be replaced by themselves. For details, you can consult the vending machine manufacturer.
vending machine manufacturers vending machine processes have been widely used to produce commercial vending machine such as vending machine manufacturers, commercial vending machine, and vending machine manufacturers etc.
And finally, if you want to find additional resources for vending machine, simply go to Haloo Automation Equipment for more.
If something seems too good to be true, then it can be a , which provides commercial vending machine value over its cost.
vending machine are raising the stakes of social marketing, but they also ease the sales process by providing ways for vending machine manufacturers to effectively interact with customers.
An interesting website that contains directions (and recommends items) for vending machine commercial vending machine is Haloo Automation Equipment. Find us on Haloo Automation Equipment, your problem will be fixed.