Which vending machine manufacturer in Guangdong is better? How to do the daily maintenance of the vending machine?

You will see unmanned vending machines everywhere in your life, especially in places such as stations and hotels. These places have the characteristics of stable flow of people and high demand, and sales will be better. However, unmanned vending machines in these places are also prone to wear, dirt, etc. When faced with the contamination of vending machines, how should we solve them? Pickup port: Since the pickup port of the unmanned vending machine is low and easy to be stained with dirt, the merchant must wipe the outside and inside of the pickup port with a rag every time they replenish goods, leaving consumers behind Good impression of clean and clean. Outside of the vending machine: When there is dust on the outside of the machine, wipe it with a dry cloth. If there is too much dust and cannot be wiped off, use warm water or water to dilute and neutralize to clean, and then use a cloth dampened with diluted solution to clean the machine. Even if the dirt is difficult to remove, do not wipe the machine with solvents or alkaline liquids, otherwise the panel and selection buttons may crack. Coin recognizer: Coins are easily stained during the circulation process. When the stained coins pass through the coin channel of the vending machine, it will stain the channel over time. If the dirt is too serious, it will cause the unmanned vending machine to become dirty. Performance failures such as coin selection, change, and refund. In order to maintain the good performance of the coin recognizer, the passage of the coin recognizer should be wiped at least once a month. Do not wipe with gauze moistened with hot water. Use a dry cloth or a slightly moistened cloth. Unmanned vending machines need to be well maintained during operation, and careful maintenance is required when they are not used for a long time. When a vending machine is not in use for a long time, it should be locked and the door of the vending machine should not be opened at will. Take out all the goods placed inside. Set the switch of the leakage protector to OFF, and unplug the power plug. Then wipe the inside and outside of the vending machine clean, and at the same time pour out the water in the evaporator water storage box, and wipe it clean after cleaning. The above introduces the daily maintenance methods of unmanned vending machines, I hope it will be helpful to everyone. That's it for this time, see you next time. Previous: What are the manufacturers of vending machines in Guangdong? Why is the pickup port of the vending machine set at the bottom? Next: What are the basic functions of the vending machine? Which vending machine manufacturer is better in Dongguan?