What should I pay attention to when placing the vending machine?

Economic and social development is driving the improvement of people's living standards, and now more and more unmanned self-service devices are appearing in various parts of our country. For example, outdoor places such as parks, squares, commercial streets, tourist attractions, etc., have vending machines. So, do you know what to pay attention to when placing vending machines? 1. The ground of the venue should be solid and higher than the ground. Because the vending machine has four bottom corners, there are certain requirements on the ground when placing the vending machine. If the ground is relatively soft, it is likely to cause the machine to sink, tilt or even tip over, and in serious cases, it may even lead to accidents. Therefore, the ground is required to be firm, preferably cement ground or stone ground. If the vending machine has a special anti-settling pier, so much the better. The ground should be flat. Although the height of the four bottom corners of the vending machine can be adjusted individually, once the ground is uneven and exceeds the adjustment range of the four bottom corners, the normal use of the machine will also be affected. In addition, the location of the machine should be placed on a higher ground, so that the machine can avoid being soaked in heavy rain. 2. There should be a rain-proof roof on the top of the vending machine. Because most of the vending machines are stored outdoors, it is difficult to avoid wind and rain. If the machine is exposed to rain, it will affect the use time of the equipment to a certain extent. If it is a vending machine with a touch screen or a cash module, this kind of place is a device with a relatively high precision. If water enters the device, it will affect the normal operation of the device. The outdoor ceiling can be customized according to the specific situation of the local company. This requirement is not too big, it is sturdy and reliable, and it can be rainproof. 3. The grounding power supply needs to be maintained well. Vending machines are high-precision mechanical equipment. Generally, ordinary household 220V/50Hz triangular plug power supplies are used. Therefore, static electricity and induced current will be generated during the working process, so the grounded power supply should be maintained well. 4. The public security environment should be good. This is a factor that must be considered when placing vending machines outdoors. If the local outdoor security is very poor and people often damage the equipment, pay attention. The monitoring device can be installed at a 45-degree angle in front of the machine to display warnings. However, people's quality is improving nowadays, and few people will destroy outdoor equipment. People's needs are different, and in the process of using vending machines, they have different requirements for the machines. When the traditional specifications cannot meet the needs, it is necessary to customize the machine to a certain extent. From easy to difficult, customization can be divided into shipping method customization, overall size and appearance customization, and software function customization.