What should I do if the vending machine coil is damaged? Which vending machine manufacturer in Guangdong is better?

With the development of the economy, vending machines have appeared in the streets and alleys. Compared with the traditional shopping mode, there are many differences in use, and they are easy to use, so they are loved by many users. But in the course of use, if the coil is damaged, it will have a great impact on the normal operation. Then, what should I do if the coil of the vending machine is damaged? Regarding the vending machine, if it is operated for a long time, the internal parts of the cabinet will suffer different levels of wear and tear, and the coil will also suffer different wear and tear, so how do we repair the coil? The solenoid valve of the vending machine is cut and sealed in the middle of the capillary interface of the cold storage room, the fixing screws of the valve core and the coil are loosened and unloaded, the fixing screws on the cabinet body are unscrewed, and the coil is unloaded. Install the new solenoid coil and tighten the screws. Connect the power supply to start the cabinet. If it is a mechanical temperature control vending machine, you can turn off the thermostat. If the cabinet uses electronic temperature control, the function is to turn off the refrigeration and turn off the freezer. You can directly connect the 220V power supply without turning off the refrigeration function. Trim and cut the capillary once, quickly ignite the welding torch to heat the interface, remove the residual capillary, insert and weld the capillary that has been trimmed before, and fix the solenoid valve to the cabinet. There are many kinds of vending machines on the market. When replacing the coil, pay attention to the size and number of turns of the coil. In the market, this particular coil is usually difficult to configure, so the difficulty of maintenance is greatly increased. The vending machine is equipped with a voltage stabilizing device to stabilize the voltage, so as to prevent the coil from burning under high pressure and ensure the service life of the coil in the cabinet. What should I do if the coil of the vending machine is damaged? Which vending machine manufacturer in Guangdong is better? I hope it will be helpful to everyone. If the coil is damaged in the process of using the vending machine, you can refer to the above method to solve it. If you are not familiar with its internal structure, you can find a professional to solve it or operate under the guidance of a professional. That's it for this time, see you next time. Previous: What is the cause of automatic vending and leakage? Which manufacturer of vending machine in Dongguan is good? Next: What should I do if the vending machine is soaked in water? What are the manufacturers of vending machines in Dongguan?