What are the differences between different vending cabinets?

1. All the evaporation tubes of the high-quality vending cabinet are made of high-quality copper coils, and the panel is made of stainless steel. The surface is smooth and uniform in thickness. The high-quality plates can not only ensure the service life, but also make the appearance of the vending cabinet strong and flat. The use of copper pipes has better cooling effect and corrosion resistance than aluminum pipes or composite pipes. . 2. The structure of the cabinet structure of the automatic vending cabinet is directly related to the length of the service life of the display cabinet. There is an integral angle steel frame support between the outer shell and the inner tank of the high-quality vending cabinet, which greatly increases the firmness. After the door frame is completely welded and formed, the whole is foamed and formed at one time, which avoids the defect that the cabinet door is easy to fall off due to the improper assembly of the door frame. However, some manufacturers often do not adopt this method in order to save costs. 3. The automatic vending cabinets produced by high-quality manufacturers with fast refrigeration speed and constant temperature choose refrigeration modules from suppliers with cost-effective brands to ensure good refrigeration effects. You can choose the best working temperature to keep the food storage machine fresh. The vending cabinets added by other manufacturers often have a long refrigeration time, and the temperature is not constant, one will be high and the other will be low, which will easily cause the food to deteriorate, and the customer experience is extremely poor. Nowadays, there is a problem of -18 degrees Celsius freezer on the market. When choosing, you need to pay special attention to whether it can really reach -18 degrees, because at this temperature, the shelf life of the food can be as long as 1 month, but some manufacturers take the time A good charge is far from reaching this temperature, which is also one of the main reasons for the price difference. 4. In order to control the cost, many manufacturers of high-power commercial compressors have different choices in commercial compressors. The high-quality manufacturers have good starting performance in commercial compressors and complete specifications from small to large refrigeration capacity. The product requires different configurations, which can guarantee the frequent start times and long running time of the machine. 5. In the production process of the vertical wind cabinet of the thermal insulation vending cabinet, the thermal insulation performance of the thermal insulation layer is not only a quality indicator, but also an important factor in the use of economy. In order to achieve good thermal insulation performance, appropriate raw materials must be selected, and the bulk density and cell diameter must be controlled within the optimal range. Therefore, it is necessary to use special fixtures that can adjust the material temperature and master the mature foaming process to produce the vending cabinet with good heat preservation effect. The above introduces some of the factors that cause the price difference of vending containers, I hope it will be helpful to everyone. Later, we will introduce some questions about vending cabinets. This time we will stop here. See you next time. Previous: What are the advantages of vending cabinets over physical stores Next: What should you pay attention to when placing vending cabinets?