Vending machine maintenance advice!

Vending machine maintenance 　　 Vending machines will produce some dust and unnecessary dirt after running for a period of time. In order to extend the service life of the machine, increase the user experience better, and leave a better image for consumers, the maintenance of this machine is provided to you, and I hope it will help you! The specific methods are as follows: 　　 1. Maintenance tool towel, condensation Cleaning brush, 2-span Phillips screwdriver, water or neutral lotion, high-power blower or vacuum cleaner 2. Parts required for maintenance, surface of the fuselage, pick-up port, window display, coin recognizer, delivery slide, condenser, Trouble shooting of evaporator and remote control.　　3. Maintenance steps　　A. Vending machine body　　Vending machines include: beverage dispensers, integrated machines, convenience cabinets, etc.　　1. When the machine is dusty, you can wipe it off with a dry towel.　　2. If the dirt is serious, it can be cleaned up with a towel dipped in warm water or diluted neutral wash. 3. For the machine with a display screen, when there are stains on the screen, you need to wipe it with a dry towel. If the stain is serious, you need to use a wet towel or a wet towel with a diluted neutral detergent to wipe the key stains. Remember not to use a towel. Too wet, the purpose is just to wipe off the stains.　　 4. Do not use acidic or alkaline solvents. Otherwise, parts such as window panels, selection buttons, etc. may be corroded and cracked, or the paint on the body may fade. When removing dirt from vending machines, it is forbidden to use chemicals such as paint solvents and banana water. B. The pick-up port cleaning refers to the pick-up ports of beverage machines, integrated machines, convenience cabinets and other machines. 1. The pick-up port needs to check whether there is any stains each time the replenishment: the position of the beverage machine pick-up port alternates between cold and hot in summer It is easy to breed bacteria, and the LED lighting in the convenience cabinet will attract flying insects; in both cases, condensation water mist and flying insects are prone to occur, and you need to clean it with a towel every time you restock. C. The cleaning of the exhibition window. Since the exhibition window is the place where samples are displayed, it needs to be kept clean at all times. Because there are lights in the exhibition window, it will attract flying insects. It needs to be kept clean and bright. It can be cleaned by wiping with a wet towel. Replenishment needs to be checked and cleaned up at any time.　　D, the cleaning of the recognizer　　The recognizer includes: a banknote device and a coin device, which are devices for receiving cash. 1. In the process of receiving cash, the conveying channel of the banknote device and the recognition channel of the coin device will be dirty. Open the recognition head of the recognizer to see the dirt; 　　2, you need to use a wet towel or a neutral wash Clean the stains with a wet towel with detergent, otherwise it will directly affect the currency acceptance rate of the recognizer. Every time you add currency or collect cash, you need to check and clean up! 　　E. The cleaning of the shipping chute is a must for the shipment of beverages and food. The road, 　　1. In the case of beverage breakage, the beverage with syrup will directly cause stains on the shipping chute, which can be viewed by opening the inner door.　　2. It will be dry if it is not cleaned for a long time, so it needs to be cleaned with a wet towel. Every replenishment needs to be checked.　　F. Condenser cleaning　　 At least once a month, use a vacuum cleaner and condenser cleaning brush to remove the garbage or dirt attached to the condenser fins. Not cleaning for a long time will result in poor cooling effect, waste of electricity, and serious damage to the compressor! 　　 Note: Use hard brushes other than metal (such as condenser cleaning brushes), move up and down to clean. You can also use a vacuum cleaner to suck out. Otherwise, it will affect the machine's refrigeration. If it is dirty, the cooling unit needs to be removed for deep cleaning.　　G, cleaning of the evaporating dish　　The evaporating dish is a place where excess condensed water is stored, and it will evaporate through the copper tube of the condenser. 1. If the evaporation is not complete, there will be water overflow, you need to use a screwdriver to remove the baffle of the evaporating dish, take out the evaporating dish to pour out the condensed water in the evaporating dish 2. Clean at least once every two months, the amount of condensed water produced It is related to the ambient temperature of the machine and is directly proportional to the ambient temperature.　　 This article is organized by a vending beverage machine, this article does not represent the point of view of this site Previous article: Which is better for unmanned convenience stores or vending machines?