Troubleshooting and maintenance methods of unmanned vending machines!

Troubleshooting and maintenance methods of unmanned haloo-vending.com/vending-machine' target='_blank'>vending machines! Do you know unmanned vending machines? The following editor will explain it! In recent years, due to the advancement in production technology of domestic unmanned vending machine enterprises, the failure rate of unmanned vending machines has decreased significantly compared with the previous two years. However, it is impossible for large mechanical equipment such as unmanned vending machines to fail. What are the reasons for the failure of the unmanned vending machine? 　1. Since the unmanned vending machine is jammed with spring spiral goods, the spring rotation will produce squeezing force on the goods when the machine is shipped. The squeezing force is positive and inclined Under the action of positive squeezing force, the product is easy to sway or even fall. This will cause the product to be stuck below the arrival of the goods (under the spring); 　Solution: 　First take out the stuck goods, and then enter the unmanned vending machine management page fault item and select the clear fault of the goods. And in the future business? Make corresponding changes to the placement of goods, mainly because the size of the main products should be as consistent with the size of the goods as possible, not too small and not larger than the size of the spring. 　二、 The unmanned vending machine is out of stock, and there is no change. The main reasons for this situation are as follows: 　1. There is no change in the changer; 2. There is change in the changer, but the default amount of change in the system is zero; 3. The changer is stuck; 4. The dust is too serious. Solution: 　1. Make up the change; 2. Go to the system management page and check if there is no record after the change was made last time (some unmanned vending machines need to manually enter the amount of change after making the change), if the quantity is 0, Please modify; 3. Disassemble the banknote device to take out the jammed currency; 4. Disassemble the banknote device with a brush to carefully and carefully clean up the dust or send it to the manufacturer for cleaning.　3. The unmanned vending machine puts the change, but the change does not enter the change device? Instead, it is deposited in the cash collection area.　The problem is mostly due to a system error of the banknote device (the failure to shut down for a long time). Solution: 　Enter the system management page three minutes after turning off the machine, and then use a small stick to penetrate the reset button of the banknote device to reset (after inserting the small stick and pressing the reset button, you will see the light on the banknote device is on and off and then again Let go if it’s on) Wait a few minutes and then turn it off and restart it again to basically solve the problem! 　4. The light on the banknote receptacle of the unmanned vending machine does not turn on or turns on and off, and the banknotes are inserted at the same time? Suck money in.　There are mostly two possibilities for this kind of problem: 1. It is caused by foreign objects in the banknote device, and 2. The iron cash box under the banknote device is not installed properly. Solution: 　Turn on the banknote device, remove the foreign objects, shut it down, and then turn it on again. Turn off the power of the machine? Reinstall the iron cash drawer! 　V. Scan the QR code and pay successfully without shipping. Solution: 　This is the signal is not If it is caused by stability, find out the signal line and sell the detection signal outside the cargo plane. How much do you know about today's content? For more information about unmanned vending machines, please follow our official website haloo-vending.com.

To live up to our responsibilities to serve and enhance the communities in which Haloo Automation Equipment Co., Ltd works and lives and the society on which we depend.

And finally, if you want to find additional resources for vending machine, simply go to Haloo Automation Equipment for more.

Technology upgrades can pay for themselves quickly by improving vending machine and enabling employees to accomplish more in less time. It may be time to focus on vending machine manufacturers to ensure they run smoothly and efficiently.

In various different types of commercial vending machine, vending machine manufacturers vending machine is one of the most commonly used.

Haloo Automation Equipment Co., Ltd has developed a unique technology with many applications including commercial vending machine.