The self-help vending machine clean inside and outside

No self-help vending machine clean inside and outside in the self-help vending machine for cleaning, not only to its body is clean, also note to clean the display screen. And this screen cleaning can be divided into outside and the inside the machine, closed to mainly to wipe the screen surface cleaning, clean inside machine requires open display case. Some need to be aware of when, when cleaning the clean point is to understand. Cleaning: within its internal dust, off the monitor power supply, with a phillips screwdriver unscrew the four corners of the display, screw, remove the display back cover back. First brush with paint to monitor cleaning, dust removal is tube parts, ignition coil and tube tail circuit board. Kinescope glass device were also, be careful damage, monitor of the circuit board tube seat at the end of the tube, put some apparent circuit board plug a tail pipe and tube of adhesive in together, forced pressed the possible damage to the tube, please note when operating. Outside cleaning: anti glare on the surface of the display screen, anti-static paint a very thin layer of chemical coating, the dust on the monitor screen at ordinary times, should remember turning off the power of the monitor, unplug shows power and signal cables, with a soft dry cloth outward from the center to wipe, carefully wipe the method should be inner ring out radially outward gently wipe the screen, if the screen surface is dirty, you can use a small amount of water moisture absorbent cotton or lens paper to wipe, never chemical solutions such as using alcohol to wipe. In addition to the display, also want to commonly used brush wipe often displays the dust and dirt on the chassis, try not to use wet cloth to wipe brush touch water. A: self-help vending machine way of buying