Professional Haloo Vending Machine Manufacturer & Supplier.
The correct cleaning method of vending machine2
Vending machines, but vending machines are easy to get dirty when placed outdoors, how do we clean them? 1. External cleaning. Usually there will be dust on the outside of the vending machine. Just wipe it with a dry cloth. If there is oil or dirt that is difficult to clean, you can use warm water to dilute the detergent for cleaning, but it cannot be used. Alkaline solvent cleaning to avoid panel cracks. 2. To clean the condenser, use a vacuum cleaner or a brush to remove the garbage or dirt on the radiator of the condenser, move it up and down gently, and clean it once a month. 3. Cleaning of the evaporator, when the evaporator is dirty, take it out and clean it with water. First, you need to remove the windshield, then lift the evaporator up, remove the hook and pull it forward, being careful not to shake the evaporation tube up and down. Then pour out the water in the evaporator, clean it and wipe it with a dry cloth, and then put the evaporator back in place. 4. To clean the coin validator, wipe it with gauze dipped in warm water. If the coin channel is dirty, the performance of the coin validator will be abnormal and the coins cannot be distinguished. Therefore, the coin validator channel should be cleaned once a month. 5. Clean the shipping chute, wipe off the dirt on the surface of the shipping chute with cotton cloth to ensure smooth shipment of the product. 6. Clean the backplane, wipe the dust with a dry cloth, and clean it once a month.
We are a performance driven culture that uses vending machine to ensure continuous improvement.
Have you been looking for a good vending machine vending machine manufacturers provider? If so, we suggest that you check out Haloo Automation Equipment Co., Ltd at Haloo Automation Equipment.
vending machine is receiving a great positive feedback in the market. And many of our clients are fully satisfied with it.
As the full potential of commercial vending machine lies in , the demand for is increasing globally, and is being adopted across the global market.