Spring aisle of the vending machine how to replace the motor module and spring aisle

We all know that with the development of science and technology and society, no one now FMCG retailing has entered a new stage of retail, a growing number of vending machines began to appear in a variety of places. Spring aisle with comprehensive product vending machine mature technology, low manufacturing cost, can sell a variety of drinks, snacks and other small commodities is universal, received a lot of people of all ages. In use process, according to different size of goods need to choose the corresponding specifications of the spring, we explain how to replace the spring under the aisle. Modern vending machines are modular design, maintain more convenient, we will in general merchandise that touch technology FD48 series, demonstrate the vending machine. To open the doors of vending machine first, and then pull the feeding box cable plug ( Be sure to check before drawing which layers of the good which plug links feeding box, in order to avoid wrong) , you can remove the feeding box is coming, take the time to pay attention to put off gear wheel and buckle. Vending machine feeding box down, pull the motor module power plug, the motor module and spring aisle can easily carry out. The motor module and spring are left-handed and right-handed, left-handed motor module with left-handed, work can counterclockwise shipping; Right hand motor module with right hand, work will make shipment clockwise, don't be mixed up. Spring aisle and motor modules are card buckle together, a bending spring end buckle into rotary motor module, you can take a look at this structure. Spring end bending left to hook on the left side of the bulge, the end of the spring right bend to hook the bulge on the right, so that the motor module will turn up when spring from the above loss. Often if change inside the vending machine sales of goods ( Goods size changed) , change the spring will be a common operation, because different size of goods need spring to have corresponding pitch, such as a 75 mm pitch spring can sell 6 cans or six fine some bottled drinks a little, a 80 mm pitch spring can sell 5 slightly rough some beverage bottle, a 35 mm pitch spring can sell goods size 12 CARDS. Spring specifications and product size match good advantage is to maximize the goods storage at the same time reduce the rate card goods.