Precautions for vending machine replenishment

When the vending machine is replenishing goods, it is necessary to carefully arrange the location according to the specific characteristics of the product, so that the vending machine can put the most products, but also improve the consumer's shopping experience and reduce the loss of the operator. 1. Products of different sizes should be placed in the cargo lanes of different specifications. If it is not clear what product should be placed in where, we can use a ruler to measure the diameter and pitch of the spring, and then compare the size of the product (this method is suitable There is a fixed package), in fact, the most direct way is to put the goods in the spring cargo lane to experience it, it is suitable if it is not stuck too tightly and will not fall out of the gap in the center of the spring. 2. The aerated drinks sold (that is, carbonated drinks filled with carbon dioxide) should be placed as low as possible on the vending machine cargo lane, otherwise the drink may fall and the customer may open the drink, which will not only increase the operator Loss also greatly affects the customer's buying experience.　　 3. Drinks packed in Tetra Pak bricks and cans should be placed on a cargo track with a flat bottom track to reduce the rate of jams. The friction resistance of the goods when traveling in the cargo lane is larger than that of the plastic bottle, and it is easy to jam, and the flat-bottom track can effectively reduce the occurrence of the phenomenon of cargo jam.　　4. Vending machines with flat-bottomed rails should be as low as possible for low- and flat-bottomed goods.　　 5. When placing bottled beverages, place the bottle cap down as much as possible, which can effectively solve the awkward situation of standing up after the beverage bottle falls.　　6. u200bu200bWhen placing the vending machine, the upper end of the product must not be tilted outward (you can stand or tilt inward), which can effectively reduce the occurrence of jams caused by the top of the product.　　7. The same kind of goods should be placed in the same spring cargo lane. It is best to fill the goods each time. If you are not satisfied, you should leave the innermost position empty. There should be no space at the front of the spring cargo lane.　　 This article is organized by a vending machine, and the opinions of this article do not represent the views of this site.