Learn about the precautions for vending machine replenishment! !

When vending machines are replenishing goods, they need to carefully arrange their positions according to the specific characteristics of the products. This allows Fujian vending machines to display the most products, and can also improve the shopping experience of consumers and reduce the loss of operators. 1. Products of different sizes should be placed in the cargo lanes of different specifications. If it is not clear what product should be placed in where, we can use a ruler to measure the diameter and pitch of the spring, and then compare the size of the product (this method is suitable There is a fixed package), in fact, the most direct way is to put the goods in the spring cargo lane to experience it, it is suitable if it is not stuck too tightly and will not fall out of the gap in the center of the spring.　　 2. Drinks packed in Tetra Pak bricks and cans should be placed on a cargo track with a flat bottom track to reduce the jam rate. The frictional resistance of goods when traveling in the cargo lane is larger than that of plastic bottles and easy to jam, and the flat-bottom track can effectively reduce the occurrence of jams. 3. The aerated beverages (that is, carbonated beverages filled with carbon dioxide) should be placed as low as possible on the vending machine cargo lanes. Otherwise, the beverages may fall and the customers may open the beverages, which will not only increase the operators. Loss also greatly affects the customer's buying experience.　　4. When placing bottled beverages, place the bottle cap down as much as possible, which can effectively solve the awkward situation of standing up after the beverage bottle falls.　　 5. Vending machines with flat-bottomed tracks should be as low as possible for low- and flat-bottomed goods.　　6. u200bu200bThe same kind of goods should be placed in the same spring cargo lane. It is best to fill the goods each time. If you are not satisfied, you must leave the innermost position empty.　　7. When placing vending machines, the upper end of the product must not be tilted outward (you can stand or tilt inward), which can effectively reduce the occurrence of jams caused by the top of the product.　　 This article is organized by beverage vending machines. The views in this article do not represent the views of this site. Previous article: What is the development trend of vending machines in my country?