How to solve the damage of the coil of the vending machine?

How to solve the coil damage of the vending machine? Regarding the vending machine, if it is operated for a long time, the internal parts of the cabinet will suffer different levels of wear and tear, and the coil will also suffer different wear and tear, so how do we repair the coil? Let's take a look. Cut and seal the solenoid valve of the vending machine at the center of the capillary interface in the refrigerating room, loosen and remove the fixing screws of the valve core and coil, unscrew the fixing screws on the cabinet, and remove the coil. Install the new solenoid valve coil and tighten the screws. Turn on the power to start the cabinet. If it is a mechanical temperature control vending machine, the thermostat can be turned off. If the cabinet uses electronic temperature control, the refrigerating room should be closed if the refrigeration function is turned off, and the 220V power supply can be directly connected if the refrigeration function is not turned off. . Trim the capillary port that has been cut off, quickly ignite the welding torch to heat the interface, pull out the residual capillary, and insert the trimmed capillary into the interface and weld it, and fix the solenoid valve on the cabinet. In the market, there are many varieties of vending machines. When changing the coil, pay attention to the size of the coil and the number of turns. It is usually difficult to configure such a specific coil in the market, so the difficulty in maintenance is greatly increased. The vending machine contains a voltage stabilizer to stabilize the voltage, which prevents the coil from being burned under high voltage and also ensures the service life of the coil in the cabinet. If you need to know more about vending machines, please click to enter our company's official website. Previous post: Vending machines are ushering in the best era!