How to solve the coil damage of the vending machine

How to solve the coil damage of the vending machine? Internal parts are subject to different levels of wear and tear, and the coils are also subject to different wear and tear, so how do we repair the coil? Next, let’s take a look at the unmanned vending machine in Dongguan. Cut off the center of the capillary interface of the vending machine solenoid valve in the refrigerating room, loosen and remove the fixing screws of the valve core and coil, and unscrew the fixing screws on the cabinet. And remove the coil. Install the new solenoid valve coil and tighten the screws. Turn on the power to start the cabinet. If it is a mechanical temperature control vending machine, the thermostat can be turned off. If the cabinet uses electronic temperature control, the refrigerating room should be closed if it has the function of shutting down the refrigeration. . Trim the capillary port that has been cut off, quickly ignite the welding torch to heat the interface, pull out the residual capillary, and insert the trimmed capillary into the interface and weld it, and fix the solenoid valve on the cabinet. In the market, there are many varieties of vending machines. When changing the coil, pay attention to the size of the coil and the number of turns. It is usually difficult to configure such a specific coil in the market, so the difficulty in maintenance is greatly increased. To sum up, it is the wonderful sharing brought by the Guangdong unmanned vending machine. I hope it will be helpful to the majority of users and friends. If there is something unclear, I hope to understand it! At the same time, you can also follow the company’s official website or call for consultation. Previous: What is the method of operation and management of vending machines in Guangdong Next: Vending machines are welcoming a good era