How to prevent moisture in the freezer in the vending machine?

1. Adhere to the distance between the vending machine and the vending machine. After the vending machine freezer arrives in the store, the merchant must pay attention to it when placing the freezer. In spring and Akita, the walls are prone to damp and leached out water. Wet walls will affect the parts in the freezer and damage the parts. Therefore, it is recommended to place freezers and freezers 10 cm away from the wall when placing them. 2. Cleaning the vending machine on time. After a long time use, the vending machine freezer will accumulate some water inside. The merchant should pay attention to timely removal and try to keep the freezer in a dry environment. Long-term accumulation of water will cause the machine to produce a lot of small Problems, so after using for a period of time, remember to clean up in time. 3. Frequently defrost the interior of the vending machine. The interior of the vending machine freezer will form frost after a long period of use, and then it will freeze into ice. This is a situation that many people often encounter when using the freezer. At this time The merchant can cut a relatively thick plastic film according to the internal specifications of the freezer, and stick it on the part of the freezer that is prone to frost. Do not use glue, just stick it.

This is an internationally recognized standard which acts as a form of guarantee that everything Haloo Automation Equipment Co., Ltd does is managed to the highest quality standards.

All of the experts Haloo Automation Equipment Co., Ltd consulted stressed that the best recovery plans are the ones made before you need them, not afterward.

Haloo Automation Equipment Co., Ltd knew the only way to remain competitive was to ensure quality of service and customer satisfaction above all.