How to maintain the vending machine on a daily basis, it will make a lot of money for a long life!

Unmanned intelligent vending machines, like vehicles, can be used for several years if they are properly maintained. If maintenance is not carried out in daily use, it will affect the service life of the machine. Regular maintenance of vending machines is the key to maintaining stable operation of the equipment, while also extending the service life of the equipment. The stability and service life of the equipment are also important factors that directly affect profitability. Therefore, do a good job in the daily maintenance of the vending machine, which increases the operating time in disguise and earns you more wealth! The pick-up port needs to check the sanitation every time the replenishment: 1. The canned beverage may fall and spray at the pick-up port. Failure to deal with it in time will cause other shipments to be stained. 2. In summer, the temperature is changeable and there is a lot of rain. The pickup port is prone to stains and stagnant water due to its connection with the outside world. If there are stains, they need to be cleaned up with a towel in time to avoid contaminating the goods and bring a bad shopping experience to users. At the same time, it is also a safety hazard that cannot be ignored. Daily maintenance of infrared touch frame: 1. Wipe the touch screen with a dry towel to prevent touch failure due to too much dust. 2. If it affects the normal purchase of consumers, it is necessary to check the USB interface of the touch frame to avoid poor contact. Tray cleaning: regularly clean the shelves of the vending machine, open the door of the merchandise showroom, and wipe off the dust with a dry cloth; if the dust is serious, clean it with a towel and a neutral detergent. Check each wiring interface: check the circuit interface of each board of the equipment, the method is as follows: 1. Plug and unplug the interface, and ensure that all wiring connections are tight. 2. Use WD-40 cleaner on the interface where oxidation is found to clean the computer motherboard circuit. Vending machine body cleaning and maintenance: As the saying goes, people rely on clothes, horses and saddles, and the same is true for vending machines. A good and clean appearance can attract more passengers to a certain extent, so we must clean the body: 1. Vending machines When the fuselage is dusty, wipe it with a dry towel to keep the appearance of the fuselage neat and tidy. 2. If the dirt is serious, use a semi-dry towel or neutral detergent to clean it up. 3. If the fuselage has been used for a long time or has scratches and other damages, it is recommended to use stickers to make the vending machine look neat and clean. [Special reminder] When removing the dirt on the fuselage, please use a neutral detergent to clean it. Do not use acidic or alkaline solvents, otherwise the window panels and other parts may be corroded and cracked or the body paint will fade. It is forbidden to use chemicals such as paint solvents, banana water, etc., which are prone to accidents! Check whether the spring is working properly: 1. Test the cargo lane to see if there is any abnormal rotation of the spring and make adjustments. 2. Confirm that the angular position of the spring is reasonable. 3. Check whether the motor wire is loose. Infrared drop-off module check The infrared drop-off module is an important basis for detecting whether the product is successfully dropped. The method is as follows: swing your hands up and down to check whether the infrared drop can receive the signal normally. It needs to be well maintained during operation, and you can't neglect it when it is not used for a long time: When a vending machine is not used for a long time, it should be locked and the door of the vending machine should not be opened at will. At the same time, take out all the goods in it, set the switch of the leakage protector to OFF, and unplug the power plug. In addition, wipe the interior and exterior of the vending machine clean, pour out the water in the evaporator water storage box, and wipe it clean after cleaning. Finally, put a protective cover on the vending machine for safekeeping. After reading the maintenance methods of the vending machine above, I believe it will be helpful for you to operate the vending machine in the future! There are tens of millions of ways to make money, and self-service sales are the first. The maintenance is not standardized, and buyers and sellers are two tears.

Finding a reliable solution for the vending machine commercial vending machine not only supports operation of the entire system but also enhance the beauty of your workplace.

Visit Haloo Automation Equipment Co., Ltd for the best in supplies: Haloo Automation Equipment.

Our company specializes in manufacturing vending machine mainly vending machine manufacturers.

Regularly improving vending machine in accordance with customer feedback is a great way to show your brand listens and cares.

To offer abundant options of product is an important factor to a company, such as vending machinecommercial vending machine to afford high-quality products for customers.