How to maintain the vending machine daily, the life is long and the profit is much more!

Unmanned smart vending machines, like vehicles, can be used for several years with proper maintenance. If it is not maintained in daily use, it will affect the service life of the machine. Regular maintenance of vending machines is the key to maintaining the stable operation of the equipment, and at the same time prolonging the service life of the equipment, and the stability and service life of the equipment are important factors that directly affect the income. Therefore, do a good job in the daily maintenance of the vending machine, which will increase the operating time in disguise and earn more wealth for you! The pick-up port needs to check the sanitation every time it replenishes the goods: 1. There may be canned drinks falling and spraying at the pick-up port. If it is not handled in time, other shipped products will be stained. 2. In summer, the temperature is changeable and there is a lot of rain. The pick-up port is prone to stains and accumulated water due to its connection with the outside world. If there are stains, they need to be cleaned up in time with a towel, so as not to contaminate the goods, bring a bad shopping experience to users, and it is also a safety hazard that cannot be ignored. Daily maintenance of the infrared touch frame: 1. Wipe the touch screen with a dry towel to prevent touch failure caused by too much dust. 2. If it affects the normal purchase of consumers, it is necessary to check the USB interface of the touch box to avoid poor contact. Pallet cleaning: Regularly clean the shelves of the vending machine, open the door of the product showroom, and wipe off the dust with a dry cloth; if the dust is serious, clean it with a towel and a neutral detergent. Inspection of each wiring interface: Check the line interface of each board of the equipment, the method is as follows: 1. Plug and unplug the interface to ensure that all lines are connected tightly. 2. Use WD-40 cleaner to clean the computer motherboard circuit on the interface where oxidation is found. Cleaning and maintenance of the vending machine body: As the saying goes, people rely on clothes and horses rely on saddles, and vending machines are the same. A good and tidy appearance can attract more traffic to a certain extent, so it is necessary to clean the body of the vending machine: 1. Vending machine When the fuselage is dusty, wipe it clean with a dry towel to keep the appearance of the fuselage clean. 2. If the dirt is serious, it can be cleaned with a semi-dry towel or a neutral detergent. 3. If the fuselage has been used for a long time or has scratches and other damages, it is recommended to use stickers to make the vending machine look neat and clean. [Special Reminder] When removing the dirt on the fuselage, please use a neutral detergent to clean it. Do not use acidic or alkaline solvents, otherwise the window panels and other parts may be corroded and cracked or the main body paint will fade. The use of paint solvents, banana water and other chemicals is prohibited, accidents are prone to occur! Check whether the spring is working normally: 1. Test the cargo channel to see if there is any abnormal spring rotation and adjust it. 2. Confirm that the spring angle position is reasonable. 3. Check for loose motor wires. Infrared drop module inspection The infrared drop module is an important basis for detecting whether the product has been dropped successfully. The method is as follows: swing your hands up and down to check whether the infrared drop can receive signals normally. It needs to be well maintained during operation, and it should not be neglected when it is not used for a long time: when a vending machine is not used for a long time, it should be locked, and the door of the vending machine should not be opened at will. At the same time, all the products placed inside should be taken out, then the switch of the leakage protector should be set to OFF, and the power plug should be unplugged. In addition, wipe the inside and outside of the vending machine clean, pour out the water in the evaporator water storage box, and wipe it clean after cleaning. Finally, put a protective cover on the vending machine for safekeeping. After reading the above maintenance methods of vending machines, I believe it will be helpful for you to operate vending machines in the future! There are thousands of ways to make money, and self-service vending is the first. The maintenance is not standardized, and buyers and sellers cry.

commercial vending machine vending machine processes have been widely used to produce vending machine manufacturers such as commercial vending machine, vending machine manufacturers, and commercial vending machine etc.

Haloo Automation Equipment Co., Ltd’s goal is to achieve customer satisfaction through excellence in design, supply chain management, manufacturing and repair solutions.

Our company specializes in manufacturing vending machine mainly vending machine manufacturers.

We sells vending machine and focus on operational procedure and manufacturing facilities commercial vending machine.

Time is one of the biggest challenges cited by manufacturing vending machine.