How to maintain the vending machine daily, let your vending machine grow in reverse!

Why do the daily maintenance of vending machines need to be done? Regular maintenance of vending machines is the key to maintaining stable operation of the equipment, and at the same time extending the service life of the equipment, and the stability and service life of the equipment are important factors that directly affect profitability. Therefore, do a good job in the daily maintenance of the vending machine, which increases the operating time in disguise and earns you more wealth! Maintenance tool list Maintenance parts list u0026 frequency of each component maintenance operation guidance Maintenance frequency: every time the replenishment pick-up port is cleaned, the pick-up port needs to be checked for hygiene each time the replenishment port: 1. There may be canned drinks at the pick-up port If there are situations such as drop spraying, if it is not handled in time, it will cause stains on other shipped products. 2. In summer, the temperature is changeable and there is a lot of rain. The pickup port is prone to stains and stagnant water due to its connection with the outside world. If there are stains, they need to be cleaned up with a towel in time to avoid contaminating the goods and bring a bad shopping experience to users. At the same time, it is also a safety hazard that cannot be ignored. Daily maintenance of infrared touch frame 1. Wipe the touch screen with a dry towel to prevent touch failure due to too much dust. 2. If it affects the normal purchase of consumers, it is necessary to check the USB interface of the touch frame to avoid poor contact. Maintenance frequency: once a month. Operator: replenisher. Vending machine body cleaning and maintenance are the so-called people rely on clothes, horses and saddles. The same is true for vending machines. A good and clean appearance can attract more traffic to a certain extent, so it must be Do a good job of cleaning the fuselage: 1. When the vending machine fuselage is dusty, wipe it with a dry towel to keep the fuselage neat and tidy. 2. If the dirt is serious, use a semi-dry towel or neutral detergent to clean it up. 3. If the fuselage has been used for a long time or is damaged by scratches, it is recommended to use stickers to make the vending machine look neat and clean. [Special reminder] When removing the dirt on the fuselage, please use a neutral detergent to clean it. Do not use acidic or alkaline solvents, otherwise the window panels and other parts may be corroded and cracked or the body paint will fade. It is forbidden to use paint solvents, banana water and other chemicals, which are prone to accidents! Check whether the spring is working properly 1. Test the cargo lane to see if there is any abnormal rotation of the spring and make adjustments. 2. Confirm that the spring angular position is reasonable. 3. Check whether the motor wire is loose. Infrared Goods Drop Module Check Infrared Goods Drop Module is an important basis for detecting whether the goods are successfully dropped. The method is as follows: swing your hands up and down to check whether the infrared dropped goods can receive signals normally. Tray cleaning Clean the shelves of the vending machine regularly, open the door of the merchandise showroom, and wipe off the dust with a dry cloth; if the dust is serious, use a towel and a neutral detergent to clean it up. Maintenance frequency: once every two months. Operators: maintenance workers check each wiring interface to check the wiring interface of each board of the equipment. The methods are as follows: 1. Plug and unplug the interface to ensure that all wiring connections are tight. 2. Use WD-40 cleaner on the interface where oxidation is found to clean the computer motherboard circuit. Maintenance frequency: once a year. Operator: maintenance worker to clean the condenser and clean the condenser once a year (check and clean once before turning on the compressor when summer is coming), use a vacuum cleaner and an anti-static cleaning brush to attach the heat sink of the condenser Trash or dirt is removed. If it is not cleaned for a long time, it will cause poor cooling effect, waste electricity, and seriously cause compressor failure. [Note] Use anti-static brushes made of materials other than metal, move up and down to clean, or use a vacuum cleaner to suck out, otherwise it will affect the machine's refrigeration. If the dirt is serious, the cooling unit needs to be removed for deep cleaning. If the vending machine is not used for a long time 1. When the vending machine is not used for a long time, please lock the machine. 2. Take out all the goods in the equipment and clean the cargo lane to avoid corrosion. 3. The switch of the leakage protector is set to OFF, please be sure to cut off the power. 4. Wipe the outside of the machine clean and keep it dry. 5. Pour out the accumulated water in the water storage box of the evaporator, clean and wipe dry. 6. Ensure that the equipment is placed in a rain-proof, moisture-proof and sun-proof environment, and covered with a protective cover for proper storage.