How to clean and maintain the lifting system vending machine?

Vending machines, like other equipment, tend to accumulate dust after a long period of use, affecting use. Therefore, it is necessary to clean the lifting system vending machine regularly. Its cleaning is mainly divided into two parts, one is external cleaning, and the other is internal cleaning. Let's briefly introduce how to clean and maintain the lifting system vending machine? Internal cleaning: Use a soft towel or sponge dipped in warm water (neutral detergent can be added) to clean iron and plastic parts such as the fuselage, cargo tray, etc. When cleaning electrical parts such as switches and displays, please use a dry cloth water, wipe it off with a dry cloth. External cleaning: When there is dust on the outside of the machine, just wipe it with a dry cloth. If there is too much dust and cannot be wiped off, wash it with warm water or neutral water diluted, and then clean the machine with a rag dipped in the diluted solution. Xiaomei reminds everyone that even if the dirt is difficult to remove, do not wipe the machine with solvents or alkaline liquids, otherwise the panel and selection buttons may crack. However, it should be noted that when cleaning, do not use hard brushes, wire brushes, detergent powder, gasoline, banana water, acetone and other organic solvents, hot water or acids and alkalis to clean the machine. Another important point is not to spray and rinse with water when cleaning, so as not to affect the electrical insulation performance. Main points of internal and external cleaning of the display screen of the lifting system vending machine Internal cleaning: remove the dust inside, first disconnect the power supply of the display, unscrew the screws at the four corners of the display with a Phillips screwdriver, and remove the back cover of the display backward. First use a paint brush to clean the display. The dust removal parts are the picture tube, high voltage package and the circuit board at the end of the picture tube. In addition, the picture tube is a glass device, so be careful to damage it. The video amplifier circuit board of the display is inserted into the tube socket at the tail of the picture tube. Notice. External cleaning: The anti-glare and anti-static surface of the display screen is coated with a very thin layer of chemical substances. When cleaning the dust on the display screen, remember to turn off the power of the display and unplug the display power cord and signal cable. Use a soft dry cloth to carefully wipe from the center of the screen to the outside. The method of wiping should be to wipe it radially from the inner circle of the screen to the outside. Do not wipe with chemical solutions such as alcohol. In addition to the display screen, it is also necessary to use a brush to frequently wipe off the dust and dirt on the display case. Try not to wipe it with a damp cloth soaked in water.

Haloo needs to be able to reach social users in a way that complements what the brand is doing if they want to succeed at social commerce.

With all the pros and cons of different in mind, click Haloo Automation Equipment to learn more about and decide which vending machine option is best for your case.

Time is one of the biggest challenges cited by manufacturing vending machine.