Four tips for prolonging the service life of vending machines.

For vending machines, I believe that most people know how to operate and operate, good after-sales maintenance, extend machine life, increase operating time, profit margins, etc.　　 The parts of the vending machine that need to be repaired include the surface of the main body of the machine, the shipment volume, the paper and coin recognizer, the transportation track, the condenser, the evaporation tray, etc.　　 1. The exterior of unattended vending machine 　 　 The clean and neat external environment of vending machine can attract more passenger flow to a certain extent. If the outside of the machine is full of dust, wipe it with a dry cloth. If it cannot be wiped off, use warm water or water to dilute the neutral detergent and wipe the exterior of the vending machine. In addition, do not use chemicals such as paint solvents and banana water. Otherwise, accidents are prone to occur.　　Second, vending machine condenser and evaporator　　The exterior of the machine should be cleaned regularly, and the internal parts of the machine should also be cleaned properly. For example, when cleaning the condenser and the evaporator, you can use a vacuum cleaner or a brush to gently move the garbage or dirt attached to the radiator up and down, remove the dirt inside the evaporator, and then wash it with water.　　3. Coins from vending machines and banknote recognizers　　There is a high probability that coins and banknotes are contaminated by dust. When dusty coins pass through the coin passage of the vending machine, the passage will become dirty over time. If the remaining dust or stains are severe, coins from the vending machine will be produced, just like the other airplane seats above. The same, wipe at least once a month, soak the cloth with water when wiping.　　Four. Commodity transportation slide 　　 Keep the goods transportation slide clean in order to make the goods more unimpeded when they debut. Therefore, the cleaning time is at least once a month to remove the stains or dust on it, so that consumers can repurchase again.