Professional Haloo Vending Machine Manufacturer & Supplier.
Common problems and solutions of vending machines!
1 yuan coin acceptor (IT) for beverage machine does not enter the coin, the coin input rate is low: (1) First check whether the position of the toggle switch is correct. (2) Press and hold the button switch inside the coin acceptor for 2 seconds. If the indicator light is off, the power is not turned on. Check the circuit. (3) The toggle switch is normal and the power is normal. Press and hold the small red dot for 2 seconds until the red indicator light turns on, and then insert a coin 30 times (until the indicator light turns off). Common problems of banknote device 1. The adult machine can receive money just after it is turned on. After a period of time, the coin inlet of the banknote device flashes and cannot receive money. This situation is caused by the antenna inside the machine interfering with the banknote device. Keep the antenna inside the machine away from the banknote device and restart the machine. 2. Card currency: There is a red buckle marked with an arrow under the currency entry port of the banknote device. Open the banknote device. Take out the money stuck inside the banknote device, buckle the banknote device, and restart the machine. The machine has no network signal 1. There is an antenna for receiving signals in the machine. Place the antenna on the top of the machine along the small door of the machine. Then restart the machine. If the antenna is placed inside the machine, the machine's sheet metal shell will affect the network signal. 2. Click the setting button to enter the setting interface. Check whether the network type is correct in the network setting column. Normally it should be GPRS. 3. After entering the setting interface, check whether the machine IP address and port number are correct in the server setting column. Normally, it should be: IP address: 120.76.152.203 port number: 5005 After the setting is complete, click Return. Return to the purchase interface and restart the machine. 4. If the above is normal and the machine still has no signal, take out the phone card in the main control box of the machine and take a picture. Let's check if this mobile phone card is over-stop. You can ask the customer to change a mobile phone card first to see if the signal can come out. 5. If the device number is not displayed on the first setting page of the machine 3 minutes after it is turned on, the machine has no mobile phone card or the mobile phone card cannot be used normally (it is damaged). This article is organized by how much is an unmanned vending machine. This article does not represent the point of view of this site. Previous article: How to solve the problem of the cargo path of the vending machine?