How do we correctly install, use and maintain the miniature geared motor

How to correctly install, use and maintain the miniature geared motor and Guangdong vending machine. The correct installation, use and maintenance of the geared motor is an important part of ensuring the normal operation of mechanical equipment. Therefore, when you install the NEUGART planetary geared motor, please strictly follow the installation and use related matters below, and carefully assemble and use it. The first step is to confirm whether the motor and the geared motor are intact and undamaged before installation, and strictly check whether the size of each part connecting the motor and the geared motor is matched. Here are the size and matching of the positioning boss of the motor, the input shaft and the groove of the geared motor tolerance. The second step is to unscrew the screw on the dust-proof hole on the outer side of the geared motor flange, adjust the PCS system clamping ring so that the side hole is aligned with the dust-proof hole, and insert the inner hexagon to tighten. After that, remove the motor shaft key. The third step is to connect the motor and the geared motor naturally. When connecting, it must be ensured that the output shaft of the geared motor is consistent with the input shaft of the motor, and the outer flanges of the two are parallel. If the concentricity is inconsistent, it will cause the motor shaft to break or the reduction motor gear to wear. In addition, when installing the miniature reduction motor, it is strictly forbidden to hit with a hammer, etc., to prevent excessive axial or radial force from damaging the bearings or gears. Be sure to tighten the mounting bolts before tightening the tightening bolts. Before installation, wipe off the anti-rust oil on the motor input shaft, positioning boss and the connection part of the geared motor with gasoline or zinc-sodium water. Its purpose is to ensure the tightness of the connection and the flexibility of operation, and to prevent unnecessary wear. Before connecting the motor to the geared motor, please make the keyway of the motor shaft perpendicular to the tightening bolt. In order to ensure uniform force, please screw on the mounting bolts at any diagonal position first, but do not tighten, then screw on the other two diagonal mounting bolts and finally tighten the four mounting bolts one by one. Finally, tighten the tightening bolts. All tightening bolts need to be fixed and inspected with a torque wrench according to the marked fixed torque data. The relevant data of the right-angle geared motor is not exactly the same as the linear geared motor of the same model, please pay attention to it. The correct installation between the geared motor and mechanical equipment is similar to the correct installation between the geared motor and the drive motor. The key is to ensure that the output shaft of the geared motor is consistent with the concentricity of the driven part of the shaft. The above is the whole content of the article is introduced by the Guangdong unmanned vending machine. If there are any shortcomings, please forgive me! For reference and learning purposes only! Previous article: Why are fruit and vegetable vending machines loved by investors Next article: Guangdong vending machine tells you how you can make unmanned vending machines more energy-efficient