What is the difference between a fresh vending machine and a low-priced vending machine?

What is the difference between a fresh vending machine and a low-priced vending machine? The following is the relevant knowledge about the difference between a fresh vending machine and a low-priced vending machine. If you are interested, please contact our editor Let's find out!　　1. Larger effective volume　　The technical parameters of the fresh vending machine are in accordance with the requirements of international standards, and all have passed the random inspections of the national quality and technical supervision agency over the years. 2. The temperature of the vending machine is constant and the cooling speed is fast. The working temperature of the fresh vending machine is distinguished by the most suitable temperature for food storage or preservation. The vending machine is most suitable for plant-based foods and can ensure the juice contained in the food. Not lower than the freezing point and keep it fresh. The temperature of the freezer is -18 degrees Celsius, and the shelf life of food can be as long as 1 month with this low temperature. The high-quality air curtain display cabinet not only guarantees that the temperature in the cabinet meets the requirements according to the standard, but also improves the cooling speed of the high-quality vending machine by adopting the special-shaped evaporating tube and matching the unit with the appropriate cooling capacity.　　 3. Commercial high-power compressors 　　 Fresh Beijing vending machines all use commercial compressors. Commercial compressors have good starting performance and complete specifications from small to large cooling capacity, and can be configured in different ways according to different requirements of the product. Only commercial compressors can adapt to the harsh operating environment of commercial vending machines, frequent start-up times, and long-running time characteristics to ensure product quality. Although the price of commercial compressors is higher than that of domestic compressors, the failure rate is less than two thousandths.　　 Fourth, the material of the vending machine is better. All the evaporation tubes of the fresh vending machine are made of high-quality copper coils and processed into a wide surface profile. The surface of the stainless steel plate is smooth and clean, and the thickness of the whole plate is uniform. The use of an appropriate thickness not only ensures a long service life, but also makes the appearance of the vending machine flat and strong. Copper pipes have better cooling effect and better corrosion resistance than aluminum pipes or composite pipes. High-quality copper coils have the advantages of high cleanliness in the pipe and fewer pipe joints, which can effectively prevent internal leakage or blockage failures in the refrigeration system. The round tube is processed into a rectangle, so that the contact between the evaporation tube and the cold transfer liner is changed from point contact to surface contact, which enlarges the transfer area and speeds up the cooling speed.　　5. Vending machines have better heat preservation effect. 　　 Vending machines, the insulation performance of the insulation layer during the production process of the vertical wind cabinet is not only an important quality indicator of the vending machine, but also an important factor in the economical use of the vending machine. In order to achieve good thermal insulation performance, appropriate raw materials must be selected, and the bulk density and cell diameter must be controlled within the optimal range. Therefore, only by adopting the ability to control the material temperature, cooperate with special fixtures, and master the mature foaming process, can the vending machine with good heat preservation effect be produced.　　6. u200bu200bThe structure is more robust. 　　 The structural firmness of the cabinet of the supermarket vending machine is directly related to the length of service life of the display cabinet. There is an integral angle steel frame support between the outer shell and the inner tank of the high-quality vending machine. Its function is equivalent to that there are steel bars placed in the cement prefabricated board, and the firmness is greatly increased. After the door frame is completely welded and formed, the whole is foamed and formed at one time, which avoids the defect that the cabinet door is easy to fall off because the door frame is not firmly assembled. The integral steel frame has obvious advantages in one-step forming. Why don't other manufacturers use it? Because the fixture requirements are complex and the clamping is difficult, it is not possible for a manufacturer that considers the interests of consumers everywhere, so it is impossible to adopt this structure and process. The above is the information about the fresh food vending machine industry. If you want to know more about the fresh food vending machine product industry, please click to enter our official website haloo-vending.com, waiting for your information!
Haloo Automation Equipment Co., Ltd highlighted the need to foster a human openness to technological innovation.
All of the experts Haloo Automation Equipment Co., Ltd consulted stressed that the best recovery plans are the ones made before you need them, not afterward.
Haloo Automation Equipment Co., Ltd understands how essential it is to offer ample options, such as vending machinecommercial vending machine to afford high-quality products for customers.
The manufacturing industry is changing fast, so, for Haloo Automation Equipment Co., Ltd, being able to pivot and adapt as the marketplace shifts is imperative.
vending machine also offers several other vending machine manufacturers that could potentially be useful for manufacturers.