The vending machine troubleshooting

In recent years, there is no presence of the new retail sales has always been a rising tide lifts all boats, and the vending machine industry is also gradually derivatives has become no retail 'face'. In recent years, with the rise of the vending machine industry in China, and the research and development production level of the vending machine is a rising tide lifts all boats, machine failure rate is also gradually decreases and tends to be stable. But is similar to the vending machine this kind of heavy machinery, it is difficult to absolutely without any problems, so the author today to give you take stock of the vending machine and the screening of some common fault maintenance method. A freight, because most of the vending machines on the market now is spring aisle, aisle and spring, at the time of shipment spring rotation can produce extrusion for goods, under the effect of extrusion, goods may be flopping, or even fall. This will lead to the goods are stuck below the arrival of the goods, thus card goods. Solution: first of all, we need to take out the card products in the aisle, second in the vending machine on removal of the background management card goods failure. Second, the shipment was not change in general, the cause of this situation is the following: in the vending machine has no change, vending machine change device card currency, system malfunction, change the default to zero meter and the change of dust accumulation is the excessive money this time. Solution: 1. Make up change 2. Tear open change remove stuck money 3. Regular inspection system background situation 4. Tear open change USES brush dust cleaning. Three, sweeping success pay shipment does not appear this kind of problem, usually because the signal is not stable. Generally find the signal wire and signal detection. Above are some common faults of screening and maintenance methods. If you have some other questions, also welcome to discuss with the authors I.