Operation of dry goods | Tips for replenishment of comprehensive merchandise vending machines in the spring cargo lane

The comprehensive merchandise vending machine in the spring goods lane can sell beverages, snacks and other products with suitable packaging, which can meet the variety of sales at one point, and it is more versatile for points where the demand for comprehensive products is relatively high. Today we will briefly introduce the replenishment tips for this type of vending machine. The following points should be paid attention to when adding goods in the vending machine: ◆1. Products of different sizes are suitable for placing in different specifications of the goods lanes. If you are not sure what to put on the goods, you can use a ruler to measure the diameter and pitch of the spring, and then compare it. For the size of the product (with a fixed package), the simplest way is to put the product in the spring cargo lane to experience it. It is suitable if it is not stuck too tight and will not fall out of the gap in the center of the spring. ◆ 2. The aerated beverages (that is, carbon dioxide-filled carbonated beverages) should be placed as low as possible on the cargo lane, otherwise the beverage may fall and the customer may spray out the beverage when the customer opens the beverage, which will affect the customer's purchase experience. ◆ 3. Drinks packed in Tetra Pak bricks and cans should be placed on a cargo track with a flat bottom track to reduce the rate of jams. Because the rows of Tetra Pak bricks and cans travel in the cargo lane, the friction resistance is much larger than that of plastic bottles, and they are easy to jam, and the flat-bottom track can effectively reduce the jam. ◆ 4. Cargo lanes with flat-bottomed rails should be as low as possible to store low- and flat-bottomed products. Do not put tall and easy-to-fall products. It is also a headache to fall one row at a time. ◆ 5. When placing bottled beverages, place the bottle cap down as much as possible, which can effectively solve the awkward situation of standing up after the beverage bottle falls. ◆ 6. When placing the product, the upper end of the product must not be tilted outward (you can stand or tilt inward), which can effectively reduce the occurrence of jams caused by the top of the product. ◆ 7. The same kind of goods should be placed in the same spring cargo lane. It is best to fill the goods every time. If you are not satisfied, you must empty the innermost position. There should be no space at the front of the spring cargo lane. As long as the vending machine of the spring cargo lane is used in the correct way, the jam rate during use can be greatly reduced.